/* Google Analytics */ /* Google Analytics end */ CRUNCHY: Acer V203H 20” LCD monitor

Acer V203H 20” LCD monitor

Just got this budget Acer LCD monitor last week. Acer V203HIt is connected to a PC which is mainly for watching movies on the TV and the occasional web browsing and word processing. I thought of getting a used CRT monitor for this purpose, but topping up a little more money for a budget LCD monitor is irresistible.

Acer V203H specs
  • Size: 20” Widescreen
  • Resolution: 1600x900 @ 60Hz
  • Pixel Pitch: 0.276x0.276
  • Brightness: 300cd/m2 ( Typical )
  • Contrast ratio: 10000:1 (ACM)
  • Viewing angle: 170 (H) 160 (V) (CR=5)
  • Response time: 5ms
  • Display colors: 16.7M colors
  • Horizontal Frequency: 30 – 80KHz
  • Vertical Frequency: 55 – 75KHz
  • Connectors: 15Pin D-Sub
  • Power Consumption: On 25.4W, Sleep Mode 0.52W , Stand-by/Suspend 0.42W
  • Button: 6 buttons
  • Dimension(W x H x D): 474.8 x 350.16 x 177mm
  • Weight: 4.197kg
  • Stand: Tilt
  • Panel type: TN
What's inside the box? Acer V203H Power cord, VGA cable, User guide CD, Quick start guide booklet, product warranty booklet, and the LCD itself. The box came with VGA cable only because the LCD has a D-Sub (Analog) input only.

The monitor works with windows default driver, but I went ahead and installed the driver provided by Acer. I find the ADM software that's bundled in the CD to be useless and loads quite a few programs at startup. I wouldn't recommend installing the ADM software. The OSD (on screen display) menu and Nvidia Control Panel ( or if you're using ATI graphics card, ATI Catalyst Control Center ) is sufficient to control the display on the monitor.

Acer don't have the driver for the V203H for download on their official website, I wonder why. Like I said before, the monitor works with windows default driver. But if you insist on getting it because you lost the CD that came with it, let me know. I'll see if I can upload the driver for you. The manual can be downloaded at Acer's official website. *Acer has finally put up a driver for this monitor. Head to their website for the latest driver.

Too bright?

If you still find it abit too bright for reading after adjusting through the OSD menu, try to lower the gamma level using Nvidia Control Panel( if you're using a Nvidia graphics card) or ATI Catalyst Control Center (if you're using a ATI graphics card ).

The text may be too sharp or crisp when looking at them. If you're on Windows XP/Vista you can download ClearType Tuner for free from Microsoft website. Clear Type Tuner improves readability on LCD displays, which is some sort of an anti-aliasing or font smoothing program.

On a side note, someone said the monitor is 1440x900 resolution on some forums which isn't true. It is surprising he/she didn't read the manual before complaining what's not working. The Acer V203H is a 16:9 ratio screen.

Dell E2014H 19.5-Inch Screen LED-Lit Monitor

Below are some screenshots of the Acer V203H.

Acer V203H Acer V203H Acer V203H Acer V203H Acer V203H Acer V203H

33 comments:

  1. Yes please, I can't get my laptop to drive it at 1600x900 out of the box...

    ReplyDelete
  2. I'm sorry I don't quite get you. Are you trying a dual monitor setup with your laptop?

    ReplyDelete
  3. my screen is streched like the videos on youtube and movies, I had a regular montior the square monitors with my windows xp compaw presario, how could i unstrech my screen? i went to the properties when right clicking on the screen but nothing

    ReplyDelete
  4. I have a new 8.9 inch acer, aspire 1 lap top and Im pluing it in to my new acer monitor v203h lcd and the monitor tells me the cable is not connected I've checked it many times, including resart computer, then windows intializing then I get cable not con. again. This little lap t. doesn't have a cd drive. plse help!!

    ReplyDelete
  5. To those having output/display problems, get the latest drivers for your graphics card/chipset. This Acer monitor may not work with some graphics card especially older ones.

    ReplyDelete
  6. Hello crunchy,

    How to connect acer V203H to tv? What do I need to do? Ofcourse, my acer v203H has only D-sub (analog/VGA) port?
    Please tell me....

    Thanks a lot...
    HappyAcerUser

    ReplyDelete
  7. Not sure if it's even possible connecting V203H to the TV. I assume you want to connect your PC to the V203H and TV at the same time, which is a dual monitor setup.

    ReplyDelete
  8. i have this monitor and a netbook with gma900.
    and it works with full 1600x900 resolution.
    Netbooks will be able to output at 1600x900 if u set it up right.

    ReplyDelete
  9. yes gma900 will display it well and netbooks most come with newer onboard graphics, so it's not a problem. It is the older cards such as those AGP ones may have a problem.

    ReplyDelete
  10. Hi,

    I just bought the same monitor and have connected it to my laptop. The screen is flickering, i have tried everything i can think of. any suggestions? how can i make sure my laptop has the right system requirements to the screen?

    ReplyDelete
  11. what model is your laptop? does it use ATI graphics?

    ReplyDelete
  12. Hi, i got problem with this lcd. it make 1 vertical blue line today. how to solve this prob?

    ReplyDelete
  13. Does the line go across the LCD from end to end? If it does, most likely you got a defective LCD.

    ReplyDelete
  14. yes it is. I'm using Aspire m1201. This is a 2nd LCD. Last time my 1st lcd are broken too. Is it malware or power usage can cause this problem too?. I just use it for about 5 month. I have no idea why LCD from Acer can be broken within in 1 year.

    ReplyDelete
  15. hello

    i got 4 of these for the office and 3 of them are working fine except for one which is connected to a PC that has a SIS 661fx on board video card. I have downloaded the latet driver for that and it doesnt recognise the 1600x900 resolution. I cannot find the v203h driver on the cd that came with it. i installed the ADM which did not help. if you have a driver for this monitor could you please upload it or send it to my email hamidde@gmail.com? any help would be much appreciated, thanks.

    ReplyDelete
  16. hi hamidde,

    All you need is the default plug n play monitor driver assuming you're using Windows.

    If there are any problems, most likely it is a graphics card issue.

    Try updating to the latest UniVGA3 driver. If that doesn't help, update to the latest BIOS.

    ReplyDelete
  17. To hamidde again, if the above does not work, your last option is to install powerstrip.

    ReplyDelete
  18. ok i have this monitor and i have a weird issue ill be typing or dragging things or even playing games and my mouse will trip and go to the corner of the screen and do random things I've checked my mouse driers and everything i had a 19" before this and did no have an issue any ideas?

    ReplyDelete
  19. I believe the monitor has nothing to do with the weird mouse behavior.

    Assuming you are on Windows, uninstall the current driver, restart and let Windows install a generic driver for it.

    ReplyDelete
  20. the mouse drivers or the monitor drivers?

    ReplyDelete
  21. The Acer V203H driver is now available on their official website. I wonder what took them so long.

    ReplyDelete
  22. im willing 2 buy a type of this monitor.....so is t okay for me 2 buy it? Im using a G35 onboard vga s wil it works on it....pasanjayathilaka@yahoo.com

    ReplyDelete
  23. Intel G35 onboard graphic should work with the monitor.

    ReplyDelete
  24. u wr sayin about a software dat coms 2 acer.....what is it? Plus i bought somtin cal g205h is it better than de v205h? Contact me on facebook....pasan4all@yahoo.com........

    ReplyDelete
  25. The G205H is definitely better than v203h.

    ReplyDelete
  26. Hi there!
    I just bought an Acer V203h 20 inch monitor, and using it as an external display for the late 2007 MacBook Pro. When I set the maximum resolution from Leopard OS, the picture on the monitor is in the middle, but on the both sides I have those black squares which no calibration or OSD settings will remove and make the whole monitor surface fill with display content. Anybody has an idea what I am doing wrong? Any help is greatly appreciated.

    Matt
    matijagajic@gmail.com

    ReplyDelete
  27. hye crunchy, my lcd just not functioning, before this happen, it keeps coming out "auto config".. when i open my PC this morning, the lcd won't on.. what's wrong?

    i did try it on my laptop, but my laptop gets dark screen if i connect the v203h lcd to it..

    your help and advice is much appreciated..

    ReplyDelete
  28. This is monitor is excellent but, its not HD. well thats not a big deal. All monitors can play HD games

    ReplyDelete
  29. There is a problem with on screen Acer display for some people. In my Win XP system I have gone into control panel and in advanced display properties I have selected 32 mil colours instead of the highest 64 mil. Also went into Control Panel/System/Advanced Then in Settings\Performance... I have changed my selection to: Adjust for Best performance. This will not only give you a visually kinder display on your ACER Monitor but will also speed up your computer graphics.

    ReplyDelete
  30. Try to choose the best LCD monitor because it is important especially to me that I am working online and computer is my investment.

    ReplyDelete
  31. i HAVE AN Acer V203H monitor hooked up to my Marine GPS/Radar (furuno mfdbb_ I want a secound display and was told I did one with same resolution and DVI-D as my Acer. Do you know what monitor that I can buy that matchs this??

    ReplyDelete
  32. Hello Michael,

    Not easy to find one with that resolution and a DVI port. You can probably get this Dell, for example

    https://www.amazon.com/gp/product/B00E7LVBCE/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00E7LVBCE&linkCode=as2&tag=crunchy-20&linkId=3c0cbd096a693d7827cdb288ccf181dc

    ReplyDelete
  33. I have read the specs of Acer H277HU 27-inch With USB-C Monitor The features look pretty good and looks worth buying, should I go for it?

    ReplyDelete